Yaesu FTM-10R - Manual (Page 89)

87 FTM-10R O
PERATING
M
ANUAL
S
TEREO
/M
ONAURAL
S
ELECTION
You may enjoy the FM Broadcast and external audio input in stereo output.
1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item “F42 STEREO”.
3. Press the
key to enable selection of this Menu item.
4. Rotate the DIAL knob to select between “STEREO” and “MONO”.
5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.
When Stereo Audio Output is selected, an “ ” icon appears on the display.
MIC G
AIN
S
ETTING
At the factory, a microphone gain has been programmed that should be satisfactory for the
internal microphone and optional MH-68
A6J
/ MH-68
B6J
. If you us an after-market micro-
phone, you may wish to set a different Microphone Gain Level.
1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item “F19 MIC GAIN”.
3. Press the
key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select the desired Microphone Gain Level. Available selec-
tions are MIN, LOW, NORMAL, HIGH, and MAX.
5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.
PTT L
OCK
You may also lock out the PTT key when the LOCK mode is activated.
1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item “F22 PTT LOCK”.
3. Press the
key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select “ON” (Lock) or “OFF” (unlock).
Press the [VOL/SEL] key to save the new setting and exit to normal operation.
M
ISCELLANEOUS
S
ETTING