Yaesu FTM-10R - Manual (Page 16)

14 FTM-10R O
PERATING
M
ANUAL
B
ASE
S
TATION
I
NSTALLATION
The FTM-10R is ideal for base station use as well as in mobile installations. The FTM-10R
is specifically designed to integrate into your station easily, using the following information
as a reference.
AC Power Supplies
Operation of the FTM-10R from an AC line requires a power supply capable of providing
at least 9 Amps continuously at 13.8 Volts DC. The FP-1025A and FP-1030A DC Power
Supplies are available from your Yaesu dealer to satisfy these requirements. Other well-
regulated power supplies may be used if they meet the above voltage and current specifica-
tions.
Use the DC power cable supplied with your transceiver to make power connections to the
power supply. Connect the RED power cable lead to the POSITIVE (+) power supply
terminal, and connect the BLACK power cable lead to the NEGATIVE (-) power supply
terminal.
I
NSTALLATION