Uick, Eference, Uide – Standard Horizon HX-300 User Manual

Page 3

Page 3

HX300

uick

efeRence

uide

This transceiver is equipped with the E2O (Easy-To-Operate) system. You

can do the basic operation in numerical order of the illustration below.

Press and hold the

key to turn on or off the radio.

Press the key (“

VOL” indicator blinks), then press the

key to

adjust the speaker audio volume.

Press the

key to selects the operating channel.

Press the key two times (“

SQL” indicator blinks), then press the

key to squelch or press the

key to un-squelch the radio.

Press the

key to toggle the transmit power between High (5W) and

Low (1W).

Press the key briefly to recall channel 16.

Press and hold the key for two seconds to recall channel 9.

Press the key again to revert to the last selected channel.

Place your mouth about 1 inch (2.5 cm) away from MIC hole and speak

in a normal voice level while pressing the

PTT switch.

MIC Hole