Kleenmaid KED600 - Manual (Page 26)

In case of F0, F1, F2, F3, F4 failures,
contact your service technician without
hesitation.
24 25
Troubles
Trouble Check
Appliance does not
work:
• If there is current in the socket and if the fuse is
functioning.
• If the plug is correctly inserted into the socket.
There is current in the
socket, but the drum is
not rotating:
• If the door is closed tightly (press it towards the
appliance).
• If the program runs according to instructions.
• If the container is full.
• If appropriate drying time is selected.
Laundry is not dry: • If the filter is clean.
• If the condensation device is clean.
• If the room is adequately ventilated.
• If the amount of laundry to be dried is not too large.
• If the laundry loaded in the drum has not been spun
enough or if appropriate drying time has been set.
• If the room is too hot (over 25°C).
The condensation is
inadequate:
• If the room temperature is too high.
• If the condensation device is clean.
Unevenly dried
laundry:
• If the amount of laundry to be dried is not too large.
• If there are only large pieces of laundry (large and
small pieces should be dried together).
• If different fabrics are dried together (group the laundry
according to the type of fabrics).
In case of certain functional failures the appliance signals with a beep and
relevant reading flashing on the display.
If a failure occurs due to incorrect installation or inappropriate use of the
appliance, the warranty is void, and the repair bill is charged to the user.