Washer operation, Determine proper cycle, Warning – Kleenmaid LTKA6 User Manual
Page 21

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
19
802726
Washer Operation
Figure 5
Determine Proper Cycle
NOTE: Always follow manufacturer’s care labels.
NOTE: The cycle times may be longer if a
BOOSTED HOT wash is selected.
REGULAR Cycle
Use for sturdy items, like play or work clothes, towels,
T-shirts, etc. This cycle includes a wash tumble for 24
minutes. The cycle has two rinses with an optional
third rinse. The final spin starts with a two-minute
medium spin and finishes with a three-minute high
spin. The total cycle time is approximately 44 minutes
without the extra rinse.
PERMANENT PRESS Cycle
Use for permanent press items and synthetics. This cycle
includes a wash tumble of 20 minutes. The cycle has
two rinses with an optional third rinse. The final spin
starts with a three-minute medium spin and finishes
with a two-minute high spin. The total cycle time is
approximately 40 minutes without the extra rinse.
DELICATE Cycle
Wash delicate items usually washed by hand on this
cycle. The cycle includes a wash tumble of 12
minutes. The cycle has two rinses with an optional
third rinse. The final spin extracts moisture at a low
spin for four minutes. The total cycle time is
approximately 30 minutes without the extra rinse.
RINSE & SPIN Cycle
Use to quickly rinse items. The rinse is followed by a
high spin. The total cycle time is approximately
12 minutes.
NOTE: In some cases, the RINSE & SPIN cycle
may not be enough to completely remove soap. In
these cases, an additional RINSE & SPIN setting
may be necessary.
SPIN ONLY Cycle
Use to extract water from wet items. This cycle uses
the high spin. The total cycle time is approximately
10 minutes.
DRY2076N
DRY2076N
To reduce the risk of fire, electric shock,
serious injury or death to persons, read the
IMPORTANT SAFETY INSTRUCTIONS
before operating your washer.
W484
WARNING