Kleenmaid KFL1600 User Manual
Page 20
130715
Program is activated by pushing the START/PAUSE
button (F). Sound signal confi rms the start, the
display indicates fi rst washing stage and time
left to the end of washing. Washing stages are
consecutively displayed in accordance with the
selected program.
If the machine is set for the delayed start, it will start
operating after the delay time expires.
If the rinse hold function was selected, the program
will stop at the fi nal rinse and the display indicates
the fl ashing sign rinse hold (RINSE).
You may conclude the program by pressing the
START knob (F) and the machine will fi nish the
program with the spin, determined by that particular
program.
In case you would like to alter the washing program,
turn the program selector to the position “0”,
followed by the selecting rinse or merely pumping
out of water.
- End of operation
•
Sound signal indicates that you may now open
the door of the machine.
•
Extract the laundry from the drum and remove
any alien objects from the door gasket.
•
Leave the door ajar to allow the interior to dry.
•
Close the water inlet tap.
•
Switch the machine off by turning the program
selector (A) to position “0”.
20
Start the operation