Dispenser features, Warning, F ° c – Kleenmaid B Series User Manual
Page 18: Hidden control features
18
Dispenser Features
Hidden Control Features
(Electronic Control)
Sabbath Mode
This mode is intended to deactivate power to the LED and dispenser lights, while allowing the
controls to remain operational. No visual or audio alarms will be available while in this mode.
NOTE: In the event that power is interrupted while the Sabbath Mode is active, the control will remain in
Sabbath Mode when power returns.
Hidden Lockout for Upper Keypad
The purpose of this mode is to prevent tampering with the upper set of dispenser controls.
This includes the Display On/Off , Max Freeze, Max Cool, Vacation Mode, and Temperature Set
functions.
+
ON/OFF Function
The ON/OFF function turns off cooling to the
fresh food and freezer sections.
Auto Display
The AUTO Display controls the illumination of the LED display based on the light readings received from the SENSOR.
In AUTO mode, if the SENSOR indicates low light levels, the display will be dimmer than if displaying during well-lit
periods. In ON mode, the display will have only one illumination setting and will not change due to light levels.
To set the power level of the display:
•
Press and hold both the
button and the freezer
button for 3 seconds. The current active state will show in
the display by using
O
for on,
AL
for auto.
•
Use the refrigerator
button to scroll through the display states.
•
Activate the chosen setting by pressing the
button.
To activate Sabbath Mode:
•
Press and hold both the
and
buttons
simultaneously for 3 seconds. After 3 seconds, the
LED and dispenser lights will turn off. Dispenser
light will not activate during dispensing while in
this mode.
To deactivate Sabbath Mode:
•
Press and hold both
and
buttons simultaneously for 3
seconds. After 3 seconds, the LED and dispenser lights will
activate.
To activate Hidden Dispenser Lockout:
•
Press the
and
buttons simultaneously for
3 seconds.
To deactivate Hidden Dispenser Lockout:
•
Press the
and
buttons simultaneously
for 3 seconds.
To turn the unit off:
•
Press the freezer
button until the readout registers
beyond the maximum allowable freezer temperature. At
this point, the LED displays:
-- --
•
Press the
button to confirm the selection.
To reactivate the unit:
•
Press the freezer
button.
•
Press the
button to confirm the selection.
WARNING
!
To avoid electrical shock which can cause severe personal
injury or death, do not perform maintenance or service on
refrigerator unless unit is unplugged.
Temperature Conversion Mode
This mode is available to change the Temperature
Display between Fahrenheit and Celsius.
° F
° C
To change temperature reading:
•
Press the
and freezer
buttons simultaneously
for 3 seconds. Pressing the same button combination will allow
the user to toggle between the two selections .
+