Kleenmaid VC700 - Manual (Page 8)

When using the hose (8) and attachments (9), keep the machine in an upright position.
The hose handle (9) can be removed from the side of the vacuum and can be used with or without
attachments. Also maintain a grasp on the machine when using the hose as it could tip if the hose
is pulled too far.
The machine can also be used without a power head or other floor tool. You can easily carry the
machine by using the carrying handle (10).
When you have finished using the machine, turn it off by moving the on/off switch (2) into the off
position. Then unplug the cord (4) and wind it onto the power cord hook (7) and handle (1).
Caution: Important instructions for the use of a power head
➔ The brush roller is off and stopped only when the machine is in an upright position (A)
and the handle is completely locked in place, or when the hose handle (9) is removed
from the side of the vacuum. If you have the machine handle at an angle, the brush
roller will spin. Leaving the machine in a stationary position for an extended period of
time while the brush roller is spinning may cause damage to your floor or carpet.
➔ Be sure not to allow carpet edges or fringing into the brush.
➔ As with any vacuum with a rotating brush, this machine could cause damage to loosely
woven carpets or rugs, wool loop carpets, long-piled carpets, or very soft, sensitive floor
coverings. Please use the Parquet Brush on these types of flooring or floor coverings.
➔ We do not recommend the use of the power head for cleaning old and valuable
hand-crafted carpets.
➔ If you have uneven flooring, the metal part underneath the machine may come in
contact with the floor, causing scratches.
➔ Please carry the machine across high thresholds.
7
2
4
1
7
9
8
1
10