Kleenmaid CCT6010 - Manual (Page 10)

8
STARTING-UP AND APPLIANCE MANAGEMENT
Before the first use
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent. This may cause blue-
tinted colour on the glass surface.
“SLIDER” zone and timer setting zone
To select the power with the slider, slide your finger on the “SLIDER” zone. You can also directly access a particular
level if you put your finger directly on the chosen level.
Starting-up
•
Start up / switch off the hob:
Action Control panel Display
To start Press key [ 0/I ] 4 x [ 0 ] are blinking
To stop Press key [ 0/I ] Nothing or [ H ]
•
Start up / switch off a heating zone:
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
To set Slide on the “SLIDER“ [ 0 ] to [ 9 ] or
(adjust the power) to the right or to the left [ U ]
To stop Slide to [ 0 ] on “SLIDER“ [ 0 ] or [ H ]
or press on [ 0 ] [ 0 ] or [ H ]
If no action is made within 20 seconds the electronics returns to waiting position.
Residual heat indication
After switching off of a heating zone or the complete stop of the hob, the heating zones are still hot and indicate [ H ]
on the display.
The symbol [ H ] disappears when the heating zones may be touched safely.
As long as the residual heat indicators are on, don’t touch the heating zones and don’t put any heat sensitive object
on them. There are risks of burn and fire.
Extension zone
Action Control panel Display
select zone Press display [ 0 ] Control light is blinking
Select the power level Slide on the “SLIDER“ [ 0 ] to [ 9 ]
Switch off Touch key [ ] Extension zone light is off
Switch on Touch key [ ] Extension zone light is on
“SLIDER” zone and timer setting
zone
“SLIDER“ Direct access