Kleenmaid SOE100A - Manual (Page 15)

T roubleshooting
15
I f you realize that... P ossible causes W hat should you do?
The water level display
flashes although the tank
is full.
- The water tank is not
correctly installed.
- The seal located in the
water tank is faulty.
- The recognition system is
faulty. - Set up the water tank
correctly.
- Replace the seal.
- Call the After Sales Service
Dep artment.
The steam oven does not
work.
- A power supply problem.
- The electrical system is
faulty.
- Put the plug into the plug
socket.
- Check the cut-out.
- Call the After Sales Service
Dep artment.
The light on the oven
cavity does not work.
The light is faulty. Replace the light.
Water or steam comes out
of the appliance.
- The door is not properly
closed.
- The door seal has come
away from its support.
- The door seal is faulty.
- Close the door properly.
- Correctly insert the seal
into its support.
- Call the After Sales Service
Dep artment.
There is residual water in
the oven cavity on the
inner door and the door
seal.
This is normal.
Dry with a cloth.
The drip channel fills with
water after every cooking
session.
- The seal on the tank is
faulty.
-The seal on the door has
come away from its support.
- The seal on the door is
faulty.
- The door is sloping.
- Replace the seal.
- Correctly insert the seal
into its support.
- Call the After Sales Service
Dep artment.
- Call the After Sales Service
Dep artment.
Kleenmaid vapeur_GB.qxd 10/07/03 10:29 Page 15