Kleenmaid TO70X - Manual (Page 5)

5
1 - Time of day (display from 0h00 to 23h59)
2 - Thermometer
3 - Cook time display
4 - End of cook time display
5 - Selected temperature display
6 - “Programme” button
U S I N G Y O U R O V E N
1. Setting the time of day
Press button 6 “ ” 3 times until the indicator 11 for
setting the time of day comes on.
The time of day display 1 flashes to show you that
setting is now possible.
Press the + or - “ ” buttons 7 to set the time of day.
Press button 6 “ ”
The indicator 11 for setting the time of day goes out.
Only the “H” continues to flash.
2. Cooking immediately
Select the mode of cooking
Turn the cook function selector knob to the setting you
require.
Set the cooking temperature
For each mode of cooking selected, the oven will
suggest the most commonly used temperature. It is
possible to adjust this temperature by pressing the + or
- buttons 8
(depending on your recipe).
Each time the + or - buttons are pressed the pre-set
temperature is altered by 5 °C.
Following these actions the oven heats up:
•These stages on the thermometer 2 indicate
the increase in temperature inside the oven.
•3 beeps will indicate to you that the set tem-
perature has been reached.
When a cooking cycle has been completed, the cooling
fan continues to operate for a short while, to protect the
oven’s components.
To reduce this time, leave the door open for a few minutes.
NB
3. Pre-programmed cooking
The countdown of the cook time starts immediately after
the + or - “ ” buttons 7 are released.
The “ ” indicator 9 goes out a few seconds after the
last action.
The end of cooking time 4 is displayed automatically.
Following these 3 actions, the oven heats up
• The thermometer 2 begins to fill.
At the end of cooking a series of beeps is emitted for a few
minutes.
The beeps can be switched off by positioning the cook
function selector at 0 (OFF).
For a set cook time
For a set cook time and a selected finish time
Set the mode of cooking required and if necessary
adjust the temperature using the + or - buttons 8.
Press the “ ” button 6 once.
The “ ” indicator 9 comes on.
The cook time 3 flashes to indicate that adjustment is
now possible.
Press the + or - “ ” buttons 7 to set the required time.
The first time that the “ ” 7 button is pressed, the fla-
shing stops.
Set the mode of cooking required and if necessary
adjust the temperature.
Press the “PROGRAMME” button 6 once.
The indicator 9 ( ) comes on.
The cook time 3 flashes
Press the + or - “COOK TIME” buttons 7 ( ) to set
the required time.
The first time that the 7 ( )button is pressed, the
flashing stops.
At this point the oven starts to function.
The countdown of the cook time starts immediately
after the + or - “ ” buttons 7 are released.
Press the “ ” button 6 a second time.
The “ ” indicator 10 lights.
Set the end of cooking time 4 required by pressing
the + or - ( ) buttons 7.
The “ ” indicator 10 goes out a few seconds after
the last action.
At this point the oven switches off.
Following these 5 actions, the start of heating is
delayed to ensure that cooking finishes at the end time
selected.
When you have finished cooking, return the cook
function selector to 0 (OFF).
The cook time can be altered at any point by carrying out the
operation described at the beginning of the paragraph.
NB
7 - “COOK TIME” + or - button.
8 - “TEMPERATURE” + or - button.
9 - Cook time indicator.
10 - End of cook time indicator
11 - Setting time of day indicator
12 - Pyrolysis locking