Kleenmaid TO701X - Manual (Page 3)

Avantage et principe
3
b) D elayed cooking:
Turn the selector to “EASY COOK”.
Choose which dish you are going to cook from the
display panel using the button.
Place your dish in the oven and shut the door.
Turn method selector to “
”.
Turn the knob + or - to set the time you want the
food cooked by.
E.g. 1 pm (13:00).
When you have done this the start of cooking will be
delayed. The cooking time is worked out automatical-
ly. As when cooking straightaway, the time allowed
may be adjusted by the oven during cooking and the end result may vary by a
couple of minutes (+ or -) compared with the initial time given.
3.
T
ips
Once the “Auto symbol” appears in the display panel,
you can open the oven door.
Once it starts flashing however, if you open the oven
door, it will make a warning sound and the dishes
symbol will blink.
The “EASY COOK” feature MUST START WITH A COLD OVEN. You must wait for
the oven to cool down completely before using the Easy Cook method again. If
the oven is not cool enough, the temperature and the dish symbols will blink in
the display panel and you will not be able to cook.
4.
T
roubleshooting
I f you realize that... P ossible causes W hat should you do?
Beeps and symbols
• You have opened the door while
the oven is scanning. The program-
me has been cancelled.
- Let the oven cool down and try
again.
The symbol --- is flashing in the
display panel. • The oven is calculating the best
cooking time.
- This is perfectly normal.
"Auto" is displayed
• The oven has now worked out the
appropriate cooking time.
- This is perfectly normal.
The “EASY COOK” feature selec-
tor, symbols and temperature are
blinking and a beep is audible. • The oven is too hot to use the
“EASY COOK” feature.
- Either wait for the oven to cool
down or use a different cooking
method.
T˚ c
99629243_GB_A.qxd 03/09/03 16:07 Page 3