Kleenmaid TO701X - Manual (Page 2)

Advantages and operating method
ALL COOKING IS DONE WITHOUT PREHEATING THE OVEN
2
1.
A
dvantages and working principle
The “EASY COOK” feature means you no longer have to set the temperature or
the cooking method.
Your oven automatically works these out for you to give the best results.
The “EASY COOK” method is done in two stages:
1) Input. The oven uses its electronic scanners to record the cooking details of
each thing you want to cook.
You will notice the oven carrying out this operation because the right-hand end
of the display panel will become busy. This may take between 5 and 40 minutes
to complete.
DO NOT OPEN THE OVEN DOOR DURING THIS STAGE: it will give a faulty rea-
ding.
2) Calculation. The oven works out the cooking time required. The AUTO symbol
appears on the display panel. The oven shows the amount of cooking time remai-
ning as well as the actual time of day it will finish. If you want to open the door
to rearrange the food, add more liquid etc, you can.
3) When cooking finishes a series of beeps is heard.
2.
I
nstructions for use
a) C ooking straightaway:
Set the selector to “EASY COOK”.
In the display, you will see a selection of dishes.
Using the button choose the one you want
Place the dish in the oven at the level suggested in
the display.
Close the door. The oven starts the cooking cycle as
the oven's sensors start working and the display
panel becomes busy. The cooking time is displayed.
When cooking ends the oven beeps several times.
99629243_GB_A.qxd 03/09/03 16:07 Page 2