D-Link DI-524UP - Manual (Page 53)

48
LAN requesting it, first. Other devices will have a lower priority
in sending information through the router.
Name Enter a user-defined name to define this application for users
on the LAN.
Protocol Choose the protocol to be enabled for QoS from the pull-down
menu. The user may choose TCP, UDP or Both.
Port Range Enter a virtual port range that will use this application.
Remember these are virtual ports and not physical ports on the
router.
Bandwidth Use the pull-down menu to select the best bandwidth for the
QoS setting on this router. The user may set a bandwidth
between 1Kbps to 32Mbps. Choosing Best Effort will set the
router to allow the first user to access the set application to
have the total bandwidth needed for the file being transferred.
Choosing Full will denote that the router will allot 100Mbps of
bandwidth for the specified QoS implementation. Only one QoS
implementation can be set at Full.
Click Apply to set the QoS for IP .