beautypg.com

Operating your oven cooking tips, Food placement, Adjusting the oven temperature – Dacor MORD230 User Manual

Page 23

background image

21

Operating Your Oven

Cooking Tips

Food Placement

typically, when baking on two racks, use rack posi-

tions #2 and #4 or #1 and #3. when baking on three

racks, use rack positions #1, #3 and #5.
turn pans on the racks so that the long sides run left

to right, as you face them.
when you are cooking a food item that is very heavy,

use the Dacor gliderack oven rack. you can pull it out

further than a conventional rack, making it easier to

check the food, stir, or add ingredients.
heavier roasting pans and dishes will cook better on

rack position #1.
when using a baking stone, use rack position #1 for

best results.
if you put a baking stone on the gliderack oven rack,

instead of one of the standard oven racks, you can

pull the stone out of the oven further, making pizza

easier to remove.

Adjusting the Oven Temperature

your oven is equipped with a feature that allows you to

calibrate the temperature inside the oven to match the

display value without the help of a service technician. Due

to various conditions, the actual temperature inside may

vary somewhat from the displayed temperature. the set-

ting may also vary from mode to mode.
to change the offset temperature:

place an oven thermometer inside the oven.

1.

check the temperature variance by running the oven

2.

for one hour in each mode at 350°f (except broil

mode). in broil the normal operating temperature is

555°f. take note of the temperature variance in each

mode.

with the oven off, press and hold the

3.

0 and # keys on

the number keypad at the same time. the oven will

beep and “Pass” will appear on the display.
enter

4.

6428 on the number keypad, then start.

press the cooking mode key for which you want to

5.

change the offset.
enter an offset temperature value from 1 to 35°f (1

6.

to 18 for ovens set to celsius). press the # key if you

want the offset to be a negative (-) value.
press

7.

start.

repeat the steps above for any other cooking modes

8.

you need to offset.
press

9.

CanCel to exit offset mode.

1

2

3

4

5

6