Kleenmaid CH611X - Manual (Page 8)

7
INSTRUCTIONS FOR USE
CLEANING THE APPLIANCE
Always allow the appliance to cool down before cleaning to avoid a burn injury.
Do not use caustic or abrasive agents, coarse wire wool or hard tools as these can damage the
surface finishes.
Normally, wiping with a soft cloth dampened with hot detergent solution is sufficient but for stubborn
marks the following is recommended:
Vitreous Enamel parts – use only a cleaner that is recommended for this type of material.
Burner Assemblies – remove from the cooktop and soak for about 10 minutes in hot detergent solution.
Rinse off and dry checking that the burner holes are not clogged, then reassemble in the correct order.
ASSEMBLY OF BURNERS ACCORDING TO MODEL
Burner Base Burner Head Cap
Dual Injector Wok
Burner
Single Injector Wok