Kleenmaid CH311B - Manual (Page 14)

12
CH311S SOLID ELEMENT - INSTRUCTIONS FOR USE
Fig 1 Fig 2 Fig 3
Rotate the knob (Fig 1) to the position correspondent to the needs of cooking taking into consideration
that to a higher number a higher heat supply corresponds, see table below.
Switch Heat intensity
1 Weak
2 Gentle
3 Slow
4 Medium
5 Strong
6 Intense
The knob can be rotated in a clockwise or anticlockwise direction with 7 fixed position 0 - 6.
The pilot lamp on (Fig 2) indicates when plate is connected.
Some types of pilot lights will maintain
some slight luminescence even after disconnection. This is quite normal.
WARNING!
§ It is recommended to use cooking receptacles with a flat bottom and having same diameter or
slightly higher than that of the plate (Fig 3).
§ Avoid overflows of liquid. Once boiling point has been reached or liquid is heated, reduce the heat
supply.
§ Do not leave the electrical plates on without receptacles on the top or with empty pots and pans.
§ At the end of cooking turn the knob to position “0” (zero).