Kemppi FreshAir Flow Control unit - Manual (Page 5)

EN
5
© Kemppi Oy / 1309
1. INTRODUCTION
1.1 General
Congratulations on choosing the FreshAir Flow Control respiratory system.
Used correctly, Kemppi products can significantly increase the productivity
of your welding, and provide years of economical service.
This operating manual contains important information on the use,
maintenance and safety of your FreshAir Flow Control respiratory system.
The technical specifications of the equipment can be found at the end of the
manual.
Please read the operating manual and other instructions carefully before
using the equipment for the first time.
For more information on Kemppi products, contact Kemppi Oy, consult an
authorised Kemppi dealer, or visit the Kemppi web site at www.kemppi.com.
The specifications presented in this manual are subject to change without
prior notice.
Important notes
Items in the manual that require particular attention in order to minimise
damage and personal harm are indicated with the ’NOTE!’ notation. Read
these sections carefully and follow their instructions.
1.2 About FreshAir Flow Control system
FreshAir is a respiratory protective system, which is based on the principle
of circulated pressurized air in the hood. The belt-mounted blower unit
delivers air through a filter and via an air hose into a headpiece. The supply
of filtered air creates positive pressure inside the headpiece, which prevents
the external contaminated air from entering the user’s breathing zone.
The supply of air also ensures the user comfortable breathing without
having to overcome the resistance of filters.
FreshAir Flow Control respiratory system meets the European standard
EN 12941, when used with Beta/Delta 90 FreshAir helmets.
It provides protection against non-toxic and toxic particles, solid and liquid
aerosols.
Disclaimer
While every effort has been made to ensure that the information contained
in this guide is accurate and complete, no liability can be accepted for any
errors or omissions. Kemppi reserves the right to change the specification of
the product described at any time without prior notice. Do not copy, record,
reproduce or transmit the contents of this guide without prior written
permission from Kemppi.
5
© Kemppi Oy / 1309