Kemppi ArcSensor User Manual
Arcsensor, Wire path maintenance, Quick guide

ArcSensor
The ArcSensor device allows any welding machines equipped with a Euro connector
to be monitored with Kemppi's ArcQuality system. For more information about
ArcQuality, visit www.kemppi.com/arcquality.
1. Choose the wire guide tube and install it using the 3 adaptor bushes.
2. Connect the ArcSensor to the Euro connector on your wire feeder.
3. Connect the welding gun to the Euro connector on the ArcSensor.
4. Connect the Kemppi ArcQuality Smart Reader to the MIL connector
on the ArcSensor.
Quick
guide
2.
3.
4.
Wire path maintenance
To service or change the wire guide, remove the 3 adaptor bushes.
Wire guides
wire ø mm
guide markings
length
colour
pcs
code
0.8 – 1.0
KEMPPI 5.9/1.5
99
orange
5
SP007111
1.0 – 1.4
KEMPPI 5.9/2.0
99
orange
5
SP007112
1.4 – 1.6
KEMPPI 5.9/2.5
99
orange
5
SP007113
SP007205 wire guide set
1 pc
wire guide (0.8 – 1.0)
1 pc
wire guide (1.0 – 1.4)
1 pc
wire guide (1.2 – 1.6)
1 pc
adaptor bush
1 pc
adaptor bush
1 pc
adaptor bush
Three wire guide sizes are available in packages of 5 pcs.
1.