Kemppi Minarc 120 AU - Manual (Page 16)

EN
Minarc 120AU Minarc 150AU
Connection voltage 1 ~ phase 50/60 Hz 240 V + 10 % ... - 20 % 240 V + 10 % ... - 20 %
Rated power at max. current
ED MMA 50 %, 110 A/5.5 kVA 35 %, 140 A/7.5 kVA
ED MMA 100 %, 80 A/3.9 kVA 100 %, 100 A/5.1 kVA
ED TIG 50 %, 120 A/3.5 kVA 35 %, 150 A/5.0 kVA
ED TIG 100 % ,80 A/2.2 kVA 100 %, 110 A/3.3 kVA
Supply current
35 % ED I
1max
20 A 26 A
100 % ED I
1eff
12 A 15 A
Connection cable H07RN-F, 3G1.5 (1.5 mm2, 3 m) H07RN-F, 3G6 (2.5 mm2, 2 m)
Fuse (delayed) 10 A 15 A
Welding range
MMA
10 A/20.5 V – 110 A/24.4 V 10 A/20.5 V – 140 A/25.6 V
TIG 5 A/10 V – 120 A/15 V 5 A/10 V – 150 A/16 V
Welding current control stepless stepless
Open circuit voltage 30 V 30 V
Idle power <30 W <30 W
Power factor 100% ED 0.60 0,60
Efficiency 100% ED 80 % 80 %
Stick electrodes Ø 1.5–2.5 mm Ø 1.5–3.25 mm
External dimensions LxWxH 320x123x265 mm 320x123x265 mm
Weight without connection cable 4.0 kg 4.0 kg
Weight with connection cable 4.6 kg 4.6 kg
Temperature class B (130° C) B (130° C)
Operating temperature range -20...+40° C -20...+40° C
Storage temperature range -40...+60° C -40...+60° C
Degree of protection IP23S IP23S
EMC class A A
Norms AS 1674.2 AS 1674.2
AS/NZS 3652 AS/NZS 3652
WTIA Tech note 22 WTIA Tech note 22
EN/IEC 60974-1 EN/IEC 60974-1
EN/IEC 60974-10 EN/IEC 60974-10
14
M
inar
c 150, 151 / © Kemppi O
y / 1117