Kemppi Minarc 120 AU - Manual (Page 15)

EN
6. teChniCal data
Minarc 150, 150 VRD Minarc 151
Connection voltage 1 ~ phase 50/60 Hz 230 V ± 15 % 110 V ± 15 %
Rated power at max. current
35 % ED MMA 140 A/7.5 kVA 140 A/7.5 kVA
100 % ED MMA 100 A/5.1 kVA 100 A/5.1 kVA
35 % ED TIG 150 A/5.0 kVA 150 A/5.0 kVA
100 % ED TIG 110 A/3.3 kVA 110 A/3.3 kVA
Supply current
35 % ED I1max 27 A 59 A
100 % ED I1eff 16 A 39 A
Connection cable H07RN-F, 3G2.5 (2.5 mm2, 3 m) H07RN-F, 3G6 (6 mm2, 2 m)
Fuse (delayed) 16 A 32 A
Welding range
MMA 10 A/20.5 V – 140 A/25.6 V 10 A/20.5 V – 140 A/25.6 V
TIG 5 A/10 V – 150 A/16 V 5 A/10 V – 150 A/16 V
Welding current control stepless stepless
Open circuit voltage 85 V, (VRD 30 V) 85 V
Idle power <10 W <10 W
Power factor at 100% ED 0,60 0,60
Efficiency at 100% ED 80 % 80 %
Stick electrodes ø 1.5–3.25 mm ø 1.5–3.25 mm
External dimensions LxWxH 320x123x265 mm 320x123x265 mm
Weight without connection cable 4.0 kg 4.4 kg
Weight with connection cable 4.6 kg 5.2 kg
Temperature class B (130° C) B (130° C)
Operating temperature range -20...+40° C -20...+40° C
Storage temperature range -40...+60° C -40...+60° C
Degree of protection IP23S IP23S
EMC class A A
Norms EN/IEC 60974-1 EN/IEC 60974-1
EN/IEC 60974-10 EN/IEC 60974-10
13
M
inar
c 150, 151 / © Kemppi O
y / 1117