Kemppi AS - Manual (Page 6)

EN
2. FUNCTIONS OF AS PANEL
ON/OFF button
MIG dynamics / MMA Arc Force adjustment
• When CV is selected, parameter name ’dYn’ and the adjustable value between -9 ... 9 are shown
• When CC/MMA is selected, parameter name ’Arc’ and the adjustable value between -9 ... 9 are
shown
• In MXF mode the dynamics cannot be adjusted with the AS panel and ’--- ---’ is shown. In this case
the adjustment is done through the wire feeder panel
CC/MMA = Constant current mode. Selection with a long press. Selected when operated with ArcFeed
with CC-mode or MMA welding
MXF mode = Use with MSF or MXF feeders
CV mode = Constant Voltage. Selected when operating with ArcFeed CV-mode
Remote selection
• In CC/MMA mode the current can be adjusted with the remote
• In CV mode the voltage can be adjusted with the remote
FastMig AS
4