Preface 1.1 general, 2 about fastmig as product – Kemppi AS User Manual

Page 5

PREFACE

1.1 General

Congratulations on choosing the FastMig welding equipment. Used correctly, Kemppi

products can significantly increase the productivity of your welding, and provide years of

economical service.
This operating manual contains important information on the use, maintenance and safety of

your Kemppi product. The technical specifications of the equipment can be found at the end

of the manual.
Please read the manual carefully before using the equipment for the first time. For your

own safety and that of your working environment, pay particular attention to the safety

instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi

dealer, or visit the Kemppi web site at www.kemppi.com.
The specifications presented in this manual are subject to change without prior notice.
Important notes
Items in the manual that require particular attention in order to minimise damage and

personal harm are indicated with the

’NOTE!’

notation. Read these sections carefully and follow

their instructions.
Disclaimer
While every effort has been made to ensure that the information contained in this guide

is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi

reserves the right to change the specification of the product described at any time without

prior notice. Do not copy, record, reproduce or transmit the contents of this guide without

prior permission from Kemppi.

1.2 About FastMig AS product

FastMig AS panel can be installed to all FastMig M power sources using installation kit. After

this, FastMig M is a multi-purpose welding power source designed for demanding professional

use. It is suitable for synergic 1-MIG and basic MIG/MAG welding, as well as the modified

Wise™ processes. It can also be used as a welding power source for MMA welding. TIG welding

is also available, when connected to MasterTig LT 250. FastMig M with AS kit is compatible

with MXF and ArcFeed wire feeders for MIG/MAG welding.