Kawai ES100 - Manual (Page 19)

section
19
Pl
a
y
in
g
t
h
e
Pi
a
n
o
Registration Memories
The Registration function allows the current instrument setup (sound, all settings, etc.) to be stored to a registration
memory, and conveniently recalled at the touch of a button. Each of the four registration buttons allowing up to 4
different registration memories to be stored.
„Settings stored in Registration memories
General Settings
Selected sound Keyboard and Sound Settings
Dual Mode / Split Mode (sounds, volume balance, split point) MIDI Settings
Reverb Speaker Settings
Other Settings
„Selecting a Registration memory
Press the REGISTRATION button.
The LED indicator for the REGISTRATION button will turn on to
indicate that the registration function is in use.
Press the LESSON or SOUND buttons to select the desired
registration memory.
* The metronome is disabled in the Registration mode.
„Exiting Registration mode (restore previous settings)
To return to normal playing mode without selecting the
registration (i.e. restore the previous panel settings):
Press the REGISTRATION button.
The LED indicator for the REGISTRATION button will turn off,
and the instrument will return to normal playing mode.
„Storing a Registration memory
Press and hold the REGISTRATION button, then press LESSON
or SOUND button.
The current instrument setup will be stored to the registration
memory assigned to the pressed LESSON or SOUND button.
hold