Dual XDMA6355 - Manual (Page 22)

22
Bluetooth
®
Operation
XDMA6355 OPERATION
Overview
Connecting a Bluetooth device requires first connecting the Dual BTM60 Bluetooth
interface module (sold separately). When connected to a Dual Bluetooth ready head unit,
the BTM60 supports the HFP (hands-free profile), A2DP (advanced audio distribution
profile) and AVRCP (audio video remote control profile).
Preparation
Before you can use a mobile device with this head unit, it must be paired and connected.
Please make sure that Bluetooth is activated on your mobile device before you begin the
pairing process. Refer to the owner's manual of your mobile device for more details.
Bluetooth Pairing
1) To pair a Bluetooth enabled mobile phone to your head unit, press on the head unit
or BTM60, or press MODE until "DUAL_BTM60" is displayed.
2) Press and hold on the head unit or BTM60 for 5 seconds, until "PAIRING" is
displayed, the Bluetooth icon will flash every second. The head unit will begin to
broadcast the pairing signal for 90 seconds.
3) Complete the pairing from the Bluetooth menu of your mobile device by searching
for new devices. Please refer to your mobile device instructions for further information
on Bluetooth pairing and connections. The Bluetooth icon will illuminate solid when
connected.
The BTM60 device name is "DUAL_BTM60."
The password for the DUAL BTM60 is 1234.
Compatibility
• Due to the differences in Bluetooth technology, some mobile devices may be
incompatible or function improperly when used with the BTM60.
Connection Notes
• If AUTO-CON is set to OFF, you must press to connect after pairing.
• From Bluetooth standby mode, press to disconnect your mobile device from the
BTM60.
• If your mobile device becomes disconnected, press from Bluetooth standby mode to
reconnect your mobile device to the BTM60.
• To connect a different mobile device, the currently connected mobile device must be
disconnected. If this different device has been paired previously, you may reconnect using
the mobile device's Bluetooth menu, or repeat the above pairing instructions.