Delta D29382 - Manual (Page 5)

DANGER
5- ENG D29382
The powerful spray from your pressure washer is capable of causing
damage to surfaces such as wood, glass, automobile paint, auto
striping and trim, and delicate objects such as flowers and shrubs. Before spraying,
check the item to be cleaned to assure yourself that it is strong enough to resist damage
from the force of the spray. Avoid the use of the concentrated spray stream except for
very strong surfaces like concrete and steel.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric
shock. This product is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
Improper connection of the equipment-grounding conductor
can result in risk of electrocution. Check with a qualified
electrician or service personnel if you are in doubt as to whether the outlet
is properly grounded. Do not modify the plug provided with the product-if it
will not fit the outlet, have a proper outlet installed by a qualified electrician.
Do not use any type of adapter with this product.
EXTENSION CORDS
Use additional length of high pressure hose instead of extension cords to avoid
voltage drop and power loss to the motor, and to prevent overheating. DO NOT
USE EXTENSION CORDS. NOTE: The use of additional length of high pressure
hose will lower the pressure washer's psi below 1600.
GROUND FAULT CIRCUIT INTERRUPTER PROTECTION
This pressure washer is provided with a ground fault circuit interrupter (GFCI)
built into the plug of the power supply cord. This device provides additional
protection from the risk of electric shock. Should replacement of the plug or cord
become necessary, use only identical replacement parts that include GFCI
protection.
• High velocity fluid spray can cause
objects to break, propelling particles at
high speed.
• Light or unsecured objects can become
hazardous projectiles.
RISK OF INJURY FROM SPRAY
WHAT CAN HAPPEN HOW TO PREVENT IT
• Always wear ANSI approved Z87 safety
glasses.Wear protective clothing to protect
against accidental spraying.
• Never point wand at, or spray people or
animals.
• Always secure trigger lock when wand is not
in service to prevent accidental operation.
• Never permanently secure trigger in pull back
(open) position.