Electrical specifications unit specifications – Danby PREMIERE DDR7009REE User Manual
Page 5
1) All wiring must comply with local and national electrical codes and be installed by a qualified electrician.
If you have any questions regarding the following instructions, contact a qualified electrician.
2) Check available power supply and resolve any wiring problems BEFORE installation and operation of this
unit.
3) For your safety and protection, this unit is grounded through the power cord plug when plugged into a
matching wall outlet. If you are not sure whether the wall outlets in your home are properly grounded, please
consult a qualified electrician. DO NOT USE PLUG ADAPTERS OR EXTENSION CORDS.
4) The manufacturers nameplate is located on the rear wall of the water tank compartment. The nameplate
contains electrical and other technical data specific to this unit.
5) To avoid the possibility of personal injury, always disconnect the power supply before attempting to clean
and/or service the unit.
Model Number:
DDR5009REE
DDR6009REE
DDR7009REE
Dehumidifying Capacity (Pints/ Liters)
50 / 23.7
60 / 28.5
70 / 33
Electrical Requirements
115 V / 60 Hz
115 V / 60 Hz
115 V / 60 Hz
Power Input (Watts)
600
640
770
Rated Amperage (Dehumidifying)
5.5
6
7
Air Flow Circulation- High Fan Speed
(Cubic Feet per Minute)
238
294 324
Type of Refrigerant
R-410A
R-410A
R-410A
Water Tank Capacity (Pints / Liters)
14.2 / 6.8
14.2 / 6.8
14.2 / 6.8
Operating Noise Level (dB A)
54.8
55
55.3
Unit Dimensions (W x H x D) 15
4
/
16
” x 23
10
/
16
” x 11
2
/
16
” 15
4
/
16
” x 23
10
/
16
” x 11
2
/
16
”
15
4
/
16
” x 23
10
/
16
” x 11
2
/
16
”
Net Weight (kg / lbs)
16.2 / 35.8
19.5 / 43
19.7 / 43.4
NOTE: Specifications are subject to change without notice, for further improvements.
ELECTRICAL SPECIFICATIONS
UNIT SPECIFICATIONS
4