JLCooper MCS3-SP-RS422 - Manual (Page 12)

12
MCS3-SP Pinout
The following table details the pinout of the MS3-SP in machine
mode and in host modes.
U3 position
“To Host” “To Mach”
1 Ground Ground
2 Transmit A Receive A
3 Receive B Transmit B
4 Ground Ground
5 not used not used
6 not used not used
7 Transmit B Receive B
8 Receive A Transmit A
9 not used not used
Note: These signals are at the connector at the end of
the cable.