Denso PRO 18 - Manual (Page 23)

17
DAILY INSPECTION & MAINTENANCE (cont.)
Filter Cleaning Method
➀ Remove dust from the element
with a vacuum cleaner, or rinse
in cold or lukewarm water. If the
element is extremely dirty,
wash with a neutral detergent.
➁ After the element has been
cleaned, rinse with clean
running water, allow to dry, then
reinstall.
In-Season/Off-Season Inspection & Maintenance
■ In-Season
➀ Check the prongs and surface of the power cord plug for dust
and/or dirt. If dust and/or dirt are present, wipe off with a clean,
dry cloth.
➁ Check the power cord, plug and prongs for damage or excess
play. If any damage or excess play is found, contact your
MovinCool reseller for repair.
➂ Check the air filters and drain tank.
➃ Clean the outside of the unit(s) with a damp cloth or mild
nonabrasive cleaner.
■ Off-Season
➀ Operate the unit in Fan Only mode for 8 hours.
Note: Operation is necessary to dry out the inside of the unit.
➁ Disconnect the power cord from the AC outlet.
➂ Check the prongs and surface of the power cord plug for dust
and/or dirt. If dust and/or dirt are present, wipe off with a clean,
dry cloth.
➃ Check the power cord, plug and prongs for damage or excess
play. If any damage or excess play is found, contact your
MovinCool reseller for repair.
➄ Clean the air filters.
➅ Empty all water from the drain tank.
FILTER