Denso PRO 18 - Manual (Page 18)

12
OPERATION (cont.)
How to Set a Program (Cont.)
NOTE:
• The unit will return to the previous mode if a program is turned
off while it is running.
• The Program RUN LED flashes while a program is running. It is
illuminated continuously when the program mode is activated.
• While a program is running, the program can only be stopped
by pressing the Program RUN button. All other buttons are
inoperable when a program is running.
• The unit returns to the previous mode at the end of a program.
• The unit does not have to be running to set a program.
• During programming, the unit returns to the previous mode if
no activity occurs within approximately 35 seconds.