Installation, Unpacking setup connecting the eclipse 24 – JLCooper Eclipse24 User Manual
Page 5
5
Installation
Unpacking
When you receive your Eclipse 24 Midnight, you should receive
the following items:
• Eclipse 24 Midnight
• This Users Manual
• Power Supply
• Power Cord
Please take a moment to register your product at:
This will allow us to notify you of important updates and changes
to software or features.
Setup
The compact design of the Eclipse 24 makes it easy to locate
wherever you need it. The Eclipse 24 must be setup up in a
location that does not experience vibration, excessive humidity,
dust or temperature extremes.
Connecting the Eclipse 24
The Eclipse24 can connect to the host directly using the building
Ethernet Interface or using an interface card installed in the
expansion slot. This can be an RS-422 or RS-232 Interface card.
Refer to the next section for specific instructions on how to
connect the Eclipse24 to your host computer.
The Eclipse 24 typically uses the MCS-Ethernet Interface which
connects to any 10baseT or 100baseTX Ethernet network.
1. Connect the Eclipse 24 to the Ethernet network
2. Connect the included power supply to the Eclipse 24.