Jetway Computer JBC621C86 User Manual
Page 15
11
5.
Tighten up the screw to make sure that the
card locked to the board.
6.
Press the metal hat on the other end of the
antenna connector into the antenna slot
(ANT1) on card as shown.
*The above steps completed, please restore the board to chassis and close the chassis with the
removable cover (refer to 2.6).
7.
Locate the RF slot for WIFI antenna
connector in the rear panel.
8.
Connect the external WIFI receiver to the
antenna connector on the rear panel.
This manual is related to the following products: