Jetway Computer NF77 - Manual (Page 38)

34
Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature over this
setting the system will auto shutdown to protect CPU.
Current CPU Temperature/Current System Temp/Current SFAN1, SFAN2 ,CPUFAN
Speed/Vcore/ +1.5V/+5V/+12V/+5 VSB(V) /VDIMM/VCC3/3.3SUS/VBAT(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-11 Miscellaneous Control
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Item Help
Auto Detect PCI CLK Enabled
Spread Spectrum Disabled
*** Current Host Frequency is 100MHz***
CPU Clock at Next boot is 100MHz
***Current DRAM Frequency is 333MHz***
DRAM Clock at Next Boot is SPD
CPU Clock Ratio 8X
Vcore voltage Default
VCC1.05 Voltage 1.05v(Default)
VCC 1.5 Voltage 1.50v(Default)
VDIMM Voltage 1.84v(Default)
Menu Level >
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect PCI Clock
This item allows you to enable/disable auto detect PCI Clock. The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the Spread Spectrum Disabled or choose a setting in the category
of+/-0.1%~+/-0.9%.
CPU Clock at Next Boot
Users can Page Up and Page Down or change the value. The optional range is from 100 MHz to
133MHz.
DRAM Clock at Next Boot