Jetway Computer NF77 User Manual
Page 23
19
Phoenix – AwardBIOS CMOS Setup Utility
Standard CMOS Features
Item Help
Date (mm:dd:yy) Wed, Aug13, 2008
Time (hh:mm:ss) 16 : 48 : 35
> IDE Channel0 Master None
> IDE Channel0 Slave None
> IDE Channel 1 Master None
> IDE Channel 1 Slave None
Video EGA/VGA
Halt On All, But keyboard
Base Memory 1664k
Extended Memory 392192k
Total Memory 393216k
Menu Level >
Change the day, month,
year and century
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Date
The date format is
Day Day of the week is from Sun to Sat, determined by BIOS. Read-only.
Month The month is from Jan. through Dec.
Date
The date from 1 to 31 can be keyed by numeric function keys.
Year
The year depends on the year of the BIOS.
Time
The time format is
IDE Channel 0/1 Master/Slave
Press Enter and then PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that
the specifications of your drive must match with the drive table. The hard disk will not work
properly if you enter improper information for this category. If the type of hard disk drives
is not matched or listed, you can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items. Enter
the information directly from the keyboard. This information should be provided in the
documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be “None”.