Jetway Computer NF76 - Manual (Page 41)

36
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Item Help
Auto Detect PCI CLK Enabled
Spread Spectrum Disabled
Current Host Frequency is 100MHz
CPU Clock at Next boot is 100MHz
Current DRAM Frequency is 333MHz
DRAM Clock at Next Boot is SPD
CPU Clock Ratio is 8x
Vcore voltage Default
VCC1.05 Voltage 1.05v(Default)
VCC 1.5 Voltage 1.50v(Default)
VDIMM Voltage 1.84v(Default)
Menu Level >
Vcore Voltage
-7.5% [ ]
-5.0% [ ]
-2.5% [ ]
Default
………
+2.5% [ ]
+30.5% [ ]
↑↓:Move ENTER:Accept
ESC:Abort
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
CPU Vcore
This item allows you select the CPU Vcore Voltage xx% more than the standard value, by
this function for the precise over-clocking for extra demanding of performance.
VDIMM Voltage
This item allows you select the voltage of the memory.