Jetway Computer NF76 - Manual (Page 37)

32
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
ACPI Suspend Type S1(POS)
Assign IRQ For ACPI IRQ 9
Video off option Suspend-off
SYC+Blank Video off Method V/H
MODEN USE IRQ 3
Power Button Function Instant off
FF Power after power Function Always O
HPET Support Enabled
led WDRT Support Disab
WDRT Run/stop Stop
WDRT Count 1023
Wake UP Events Press Enter
Menu Level >
↑↓→←
elp Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General H
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power
Management (ACPI). The settings are Enabled and Disabled.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS (default) Initial display power management signaling.
Blank Screen This option only writes blanks to the video buffer.
V/H SYNC+Blank This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
MODEM Use IRQ
If you want an incoming call on a modem to automatically resume the system from a
power-saving mode, use this item to specify the interrupt request line (IRQ) that is used by