Jetway Computer NC84E - Manual (Page 38)

33
The optional settings are: Auto; x4.0~x10.5.
Processor Voltage
The optional settings are: Auto; 0.800v~1.125v.
AOD Compatibility
Choose Enabled means only AMD over drive can adjust voltage
Choose Disabled means only BIOS can adjust voltage.
VDIMM Select
Use this item to select VDIMM value. The optional settings are: 1.85v; 1.90v; 1.95v;
2.00v.
N Voltage Setting
The optional settings are: 1.10v; 1.15v; 1.20v.
HT Link Speed
The Hyper Transport link will run at this speed if it slower than or equal to system
clock and this board is capable. The optional settings are from Auto;
200MHz~1.8GHz.
HT Link Width
The Hyper Transport link will run at this width. The optional settings are Auto; 4 Bit; 8
Bit; 16 Bit.
DRAM Command Rate
The optional settings are: Auto; 1T; 2T.
Memory Clock Mode
The optional settings are: Auto; Limit and Manual.