11 miscellaneous control, Host/pci clock at next boot, Dram clock at next boot – Jetway Computer NC92 User Manual
Page 36: Vdimm select, Vcc nb select
32
3-11 Miscellaneous Control
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Item Help
Auto Detect PCI Clock Disabled
Spread Spectrum Disabled
** Current Host/PCI Clock is
133
/33MHZ**
Host/PCI Clock at Next Boot is
133
/33MHZ
** Current DRAM CLOCK
533
MHz **
DRAM Clock at Next Boot
By SPD(DDR533MHz)
VDIMM
Select
1.85V(Default)
VCC NB Select
1.53v(Default)
GMCH VCCP Select 1.12v(Default)
VDA C25 Select 2.50v(Default)
Menu Level >
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect PCI Clock
This item allows you to enable/disable auto detect PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the Spread Spectrum as Enable or Disabled.
Host/PCI Clock at Next Boot
This item allows you to select the CPU/PCI Clock.
DRAM Clock at Next Boot
This item allows you to set DRAM clock.
VDIMM Select
This item allows you to set the voltage of DRAM DIMM. The optional settings are: 1.85v
(Default), 1.95v, 2.05v and 2.15v.
VCC NB Select
This item allows you to set Northbridge voltage. The optional settings are from 1.41v to
1.99v.