Jetway Computer NC9E - Manual (Page 32)

27
Type: The optional settings are: [Not Installed]; [Auto]; [CD/DVD] and [ARMD] (This
item is only optional for SATA Channel 1 Master and SATA Channel 2 Master).
LBA/Large Mode: The optional settings are [Auto]; [Disabled].
[Disabled]: disables LBA mode.
[Auto]: enables LBA Mode if the devices support it and the device is not already
formatted with LBA Mode disabled.
Block (Multi-Sector Transfer): The optional settings are: [Disabled] and [Auto].
[Disabled]: The Data transfer from and to the device occurs one sector at a time.
[Auto]: The Data transfer from and to the device occurs multiple sectors at a time if the
device supports it.
32 Bit Data Transfer: the optional settings are: [Disabled] and [Enabled].
DMA Mode: Use this item to select DMA Mode (Optional for JMicron IDE Channel
Master/Slave).
3-5 Advanced BIOS Features