Jetway Computer NC91 - Manual (Page 26)

22
3-7 Power Management Setup
The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
ACPI function Enabled
Power Management User Define
Video off Method V/H SyNC + BlANK
Video off in Suspend Yes
Suspend Type Stop Grant
Modem USE IRQ 3
Suspend Mode Disabled
HDD Power Down Disabled
Soft-OFF by PWRBTN Instant off
Wake-up by PCI Card Disabled
Power on by ring Disabled
Wake-up by USB KB from S4 Disabled
PS2 KB/MS Wake-up from s4-s5 Disabled
Resume by alarm Disabled
Date of month alarm 0
Time(hh:mm:ss) alarm 0:0:0
PM Timer Reload Events Press Enter
PCI Express PM Function Press Enter
Menu Level >
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power
Management (ACPI). The settings are Enabled and Disabled.
HDD Power Down (Disabled)
The IDE hard drive will spin down if it is not accessed within a specified length of
time.Options are from 1 Min to 15 Min and Disable.
Video Off Method
This determines the manner in which the monitor is blanked.