Jetway Computer NC91 - Manual (Page 25)

21
This item allows you setting the FAN works in full speed when the temperature over the value
which out set. If the temperature below the value but over the Idle Temperature, the FAN
will works over 60% of full speed, and the higher temperature will gain higher FAN speed,
after over the temperature which this item setting, the FAN works in full speed.
CPU Idle Temp
This item allows you setting the FAN works in 60% of full speed, when the temperature
lower than the temperature which you setting.
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
SFAN Smart Mode:
There are three choose , Disabled, Formula 1, Formula 2.
Disabled: Fan setting full speed.
Formula 1: Fan working low speed, under temperature 2.
Formula 2: Fan stop when under temperature 2.