Jetway Computer NC9BU - Manual (Page 37)

32
The optional settings are: [Enabled]; [Disabled].
Enable SB CRIO
Use this item to enable SB Compatible IO.
The optional settings are: [Enabled]; [Disabled].
High Precision Timer
Use this item to enable or disable the High Precision Event Timer.
The optional settings are: [Enabled]; [Disabled].
SLP_S4 Assertion width
Use this item to select a minimum assertion width of the SLP_S4# signal.
The optional settings are: [1-2 seconds]; [2-3 seconds]; [3-4 seconds]; [4-5
seconds].
Restore AC Power Loss
Use this item to select AC Power state when power is re-applied after power
failure.
The optional settings are: [Power-off]; [Power-on]; [Last State].
► USB Configuration
USB Ports Per-port Disable Control
Use this item to control each of the USB ports disabling.
The optional settings are: [Enabled]; [Disabled].