Jetway Computer NC9BU - Manual (Page 32)

27
Use this item to select the primary connect.
The optional settings are：[Keyboard First]; [Mouse First].
Serial Port
Use this item to enable or Disable serial port (COM).
Change Settings
Use this item to select an optimal setting for super IO device.
Serial Port Mode Select
Use this item to set serial port as RS232 or RS485.
CIR Controller
Use this item to enable or disable CIR controller.
Change Settings
Use this item to select an optimal setting for super IO device.
ERP Support
Use this item to enable or disable Energy-Related Products function.
Disable ERP for active all Wakeup function. (Include PS2, RTC, AC Power Loss,
etc…)
Watchdog Timer：
Use this item to enable or disable Watchdog Timer.
► PC Health Monitor
Press [enter] to view hardware health status.
► Voltage Configuration
CPU Vcore 7-Shift
Use this item to adjust CPU voltage by 7 step value.
CPU AGX Voltage
Use this item to adjust AGX voltage by 7 step value.
CPU PLL Voltage Select
Use this item to select a value for CPU PLL Voltage.