Jetway Computer NF81 - Manual (Page 29)

24
C6 Mode
The optional settings are: [Disabled]; [Enabled].
► SATA Configuration
Press [Enter] to make specified settings for available SATA device.
► Super I/O Configuration
► Serial Port 0 Configuration
Press [Enter] and set parameter of the following sub-items for serial port:
Serial Port
Use this item to enable or disable serial port (COM).
Change Settings
Use this item to select an optimal setting for super IO device.
Wake-up by PS/2 keyboard
Use this item to enable or disable PS/2 keyboard wake-up from S3/S4/S5.
Wake-up by PS/2 mouse
Use this item to enable or disable PS/2 mouse wake-up from S3/S4/S5.
EUP Support
Use this item to enable or disable EUP support.
PWRON after PWR-Fail
The optional settings are: [Former-Sts]; [Power On]; [Power Off].
WatchDog Function
Use this item to enable or disable Watchdog Timer Control. When set as Enabled,
the following sub-items shall appear:
WatchDog Timer Unit
The optional settings are: [Sec];[Min].