Jetway Computer NP93 - Manual (Page 28)

23
This item should be set as [Disabled] if you wish to have all active wake-up
functions.
WatchDog Timer
Use this item to enable or disable WatchDog Timer Control. When set as
[Enabled], the following sub-items shall appear:
WatchDog Timer Value
User can set a value in the range of [10] to [255].
WatchDog Timer Unit
The optional settings are: [Sec.]; [Min.].
WatchDog Wake-up Timer in ERP
This item support WDT wake-up while ERP function is set as [Enabled].
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
WatchDog Timer Value in ERP
User can select a value in the range of [10] to [4095] seconds when ‘WatchDog
Timer Unit in ERP’ set as [Sec]; or in the range of [1] to [4095] minutes when
‘WatchDog Timer Unit in ERP’ set as [Min].
WatchDog Timer Unit
The optional settings are: [Sec.]; [Min.].
ATX Power Emulate AT Power
This item support Emulate AT power function, MB power On/Off control by power
supply. Use needs to select ‘AT or ATX Mode’ on MB jumper at first (ATX Mode &
AT Mode Select).
 PC Health Status
Press [Enter] to view current hardware health status and set value in ‘Shutdown
Temperature’.
Shutdown Temperature
Use this item to select system shutdown temperature.