Jetway Computer NF36 - Manual (Page 41)

36
no effect if external graphics presents.
The optional settings are: [VBIOS Default]; [DVI→CRT]; [DVI/HDMI]; [LVDS2];
[LVDS1]; [HDMI+LVDS1]; [CRT+LVDS2]; [CRT+LVDS1].
LCD Panel Type:
The optional settings are: [1024 x 600]; [800 x 600]; [1024 x 768 18bit]; [1366 x
768]; [1280 x 800].
*Note: LCD Panel Type item is only available when IGFX-Boot Type is set as
[LVDS2], [CRT+LVDS2].
LVDS1 Panel Type:
The optional settings are: [640 x480 18-bit]; [800 x600 18-bit];
[1024x600 18-bit]; [1024x768 24-bit]; [1280x720 18-bit]; [800 x480 18-bit];
[1366x768 18-bit]; [1440x900 18-bit]; [1366x768 24-bit]; [1440x900 24-bit];
[1280x1024 24-bit]; [1440x1050 24-bit]; [1600x900 24-bit]; [1680x1050 24-bit];
[1600x1200 24-bit]; [1920x1080 24-bit].
*Note: LVDS1 Panel Type item is only available when IGFX-Boot Type is set as
[LVDS1], [CRT+LVDS1].
Panel Scaling
Use this item to select the LCD panel scaling option used by the internal graphics
device. The optional settings are: [Auto]; [Force Scaling]; [Off]; [Maintain Accept
Ratio].
*Note: Panel Scaling item is not available when IGFX-Boot Type is set as
[DVI/HDMI].
Backlight Control
The optional settings are: [PWM Inverted]; [PWM Normal].