10)jp7 (2-pin): security measure function select – Jetway Computer NF3A User Manual
Page 18
13
(9)AT_MODE (2-pin): AT Mode Function Select
Pin 1-2 closed: AT_MODE function is enabled. In this case your computer will
automatically turns on after a sudden power failure when power supply resumes.
1-2 Closed: AT Mode Selected.
AT-MODE
1
2
1-2 Open: Normal;
1
2
(10)JP7 (2-pin): Security Measure Function Select
1-2 Closed: Disable Security Measures
in the Flash Descriptor(Override).
JP7
1
1-2 Open:Enable Security Measures
in the Flash Descriptor(Default);
1