Jetway Computer NF92 - Manual (Page 39)

Users can press Enter to select the relative items for wake up events. Set it as
Disabled or Enabled in Wake-Up by USB KB from S3(S4); PS2 KB/MS Wake-Up from
S3-S5
Resume by Alarm
When set to Enabled, additional fields become available and you can set the date
(day of the month), hour, minute and second to turn on your system. When set to 0
(zero) for the day of the month, the alarm will power on your system every day at the
specified time .
Date (of month)
You can choose which month the system will boot up. Set to 0, to boot every
day.The optional settings range from 0 to 31
Time (hh:mm:ss)
You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes
to the operating system, before this function will work.
3-9 PnP/PCI Configuration
IRQ Resources
Names the interrupt request (IRQ) line assigned to the USB on your system. Activity
of the selected IRQ always awakens the system.
34