Jetway Computer NC9I - Manual (Page 35)

30
DRAM Timing Settings by SPD
The optional settings are: [Disabled]; [Enabled].
Initate Graphic Adapter
The optional settings are: [IGD]; [PCI/IGD]. Select which graphic controller to use as
the primary boot device.
IGD Mode Select
Use this item to select the amount of system memory used by the internal graphics
device. The optional settings: [Disabled]; [Enabled, 8MB].
LVDS
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following setting items will appear:
Boot Display Device
The optional settings are: [VBIOS Default]; [CRT]; [LVDS]; [CRT+LVDS].