Jetway Computer NF94 - Manual (Page 36)

31
This item allows you setting the FAN works in full speed when the temperature over the value
which out set. If the temperature below the value but over the Idle Temperature, the FAN
will works over 60% of full speed, and the higher temperature will gain higher FAN speed,
after over the temperature which this item setting, the FAN works in full speed.
CPU Idle Temp
This item allows you setting the FAN works in 60% of full speed, when the temperature
lower than the temperature which you setting.
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-7 Advanced Chipset Features
The Advanced Chipset Features Setup option is used to change the values of the chipset
registers. These registers control most of the system options in the computer.
Phoenix – AwardBIOS CMOS Setup Utility
Advanced Chipset Features
DRAM Timing selectable By SPD
SDRAM CAS Latency Time Auto
SDRAM Cycle Time Auto
SDRAM RAS-to-CAS Delay Auto
SDRAM RAS Precharge Time Auto
System BIOS Cachable Enabled
Video BIOS Cachabled Enabled
Memory Hole at 15M-16M Disabled
VGA SETTING
Onchip Fram Buffer Size 8MB
Dvmt Mode DVMT
DVMT/FI x ED Memory Size 128MB
Boot Display Auto
Panel Number 800*600
TV Standard Off
Menu Level >
 Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults